{DIY idea} small space dressing table on wheels

Such a smart and adorable idea. Dresser table with shelf is mounted on the wall, and the table below is multifunctional piece on wheels. Do you want a breakfast in bedroom? Instant office corner? or you could use an extra table when entertaining? those are some of mine ideas

found on heart handmade | originally 101 woonideeen

for my (and yours) future reference the list of materials needed and making tutorial is below (just in case it can’t be found on the original source)

Wood
pine • batten, 27 × 27 mm, 270 cm
• carpentry panel, pine, 18 mm thick, purchase size 100 × 50 cm, let this saw a 40 × 90 cm
• mdf board, 18 mm thick, 122 × 61 cm
• 2x shelf bracket, close wood, 200 × 250 mm
• wall shelf with drawer
• 4x table leg, pine, unpainted, 73 × 7 cm

Other
• wood glue
• mounting kit
• 4x small wheels 50 mm
• mirror
• 0.2 m reflector tape
• sandpaper
• sanding cork
• thinner
• Plugs

Tools
• jigsaw
• clamps
• cordless drill
• drills
• veneer lumber / plastic
• miter
• squeeze gun
• Screwdriver
• tape measure

Step 1
Cut the pine batten ​​into 4 pieces (2x 2x 40 cm and 90 cm) with a miter angle. This is done with a veneer saw and using a miter box.

Step 2
Glue the boll alert as graceful finishing edge around under the panel carpentry / tabletop.Sanding them - if necessary - on the sides light.

Step 3
Draw on the mdf board how big the rear plate should be behind the mirror. The silhouette on the MDF board is 58.5 cm high and 80 cm wide.

Step 4
Cut the marked silhouette with a jigsaw.

Step 5
Paint all wooden components in the desired colour. Ground the mdf parts with white primer first, which is not necessary for the pine.

Step 6
Screw the legs at an equal distance from the corner, to the underside of the table top.

Step 7
drill a hole into the bottom of the legs and clamp the tea wagon wheels inside them.

Step 8
Place the wall shelf with drawer on the right spot on the painted back plate and measure where the mounting bracket should come. Then screw the mounting bracket (this is part of the wall shelf) against the back plate.

Step 9
Place the table against the wall to determine the right height of the shelf. Create approximately 0.5 cm space between the table top and wall shelf - so the table can also going easy sliding.

Step 10
Glue the brackets and the mirror mounting on the rear plate.

Step 11
For easy opening of the shelf paste a reflector tape on the inside of the tray and screw it.